Aluminium Horizontal Sliding Diy Secondary Glazing System
You need one width kit plus one height kit of the appropriate length secondary glaze your window with two sliding panes.
MORE THAN TWO PANES
If you wish to secondary glaze with three or more sliding panes to match your existing window layout, you will also require one White Aluminium Multi-Pane kit for each additional pane.
SELECTING YOUR GLAZING MATERIAL
White Aluminium Secondary Glazing may be used with glass, 4mrn or 3mm thickness, or alternatively 4mm, 3mm or 2mm acrylic.
You can order the Acrylic here Acrylic Glazing Panels
4mm glass generally gives the best result, but if your window is with 800mm of the floor or otherwise exposed to impact we recommend you use acrylic or similar material instead of glass, for safety reasons. Acrylic sheet is widely available in 2mm, 3mm or 4mm thickness.
Do not buy the glazing until you have installed the outer tracks and have taken the required measurements for them.
No single pane should exceed 6010 sq mm nor should be exceed 1829mm in height.
FIXING
This system fits to the inside of the window recess. Allow a minimum of 35mm of flat window recess to accept the tracks.
We offer bespoke fabrication on all items on this site. Simply send a diagram with sizes to sales@tosps.co.uk and we will be happy to quote.
Free cut to size
Free cut to size
We offer a free cutting service on all our sheet products up to a limit of 10 panels. A charge will be added for volumes above 10.Simply order a suitable sheet and specify the cut sizes in the comments section of the checkout
Acrylic
Aluminium profiles
